A-Pillar Trim: Removal
WARNING: This page is about a different car, the 2006 Dodge Magnum, 2006 Dodge Charger, and 2006 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
- Using a trim stick or another suitable wide flat-bladed tool, carefully pry the upper end of the A-pillar trim (1) rearward from the inside of the A-pillar (3) far enough to disengage the two spring clip retainers that secure the trim to the slots in the pillar.
- Disengage the base of the A-pillar trim from the end of the instrument panel top cover.
- Remove the A-pillar trim from the vehicle.