LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> External Pages >> Different car >> Section 23 (Body - Interior & Exterior) >> Instrument Panel >> Striker-Latch-Glove Box >> Installation

Striker-Latch-Glove Box: Installation

WARNING: This page is about a different car, the 2006 Dodge Magnum, 2006 Dodge Charger, and 2006 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Striker-Latch-Glove Box R and I
GC0013494Courtesy of DAIMLERCHRYSLER CORP.
  1. Position the glove box latch striker (3) onto the instrument panel (4).
  2. Install the two screws (2) that secure the glove box latch striker onto the instrument panel. Tighten the screws securely.
  3. Close glove box door (1).
scientia non olet · About LEMON Manuals