LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> External Pages >> Different car >> Section 23 (Body - Interior & Exterior) >> Hood >> Rod-Prop >> Installation

Section 23 (Body - Interior & Exterior): Hood: Rod-Prop: Installation

WARNING: This page is about a different car, the 2006 Dodge Magnum, 2006 Dodge Charger, and 2006 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Prop Rod
GC0013455Courtesy of DAIMLERCHRYSLER CORP.
  1. Position the hood prop rod (2) pivot bracket to the right side of the headlamp mounting crossmember (3).
  2. Secure the pivot bracket to the headlamp mounting crossmember with a new blind rivet (1).
  3. Engage the prop rod into the rod clip (4) on the left side of the headlamp mounting crossmember.
  4. Close the hood.
scientia non olet · About LEMON Manuals