Latch Striker: Installation
WARNING: This page is about a different car, the 2006 Dodge Magnum, 2006 Dodge Charger, and 2006 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
Courtesy of DAIMLERCHRYSLER CORP.
- Position the latch striker (1) to the underside of the hood (3).
- Install and tighten the two screws (2) that secure the striker to the hood inner reinforcement. Tighten the screws to 28 N.m (21 ft. lbs.).
- Close the hood.