Section 23 (Body - Interior & Exterior): Hood: Bumper-Adjustment: Removal

WARNING: This page is about a different car, the 2006 Dodge Magnum, 2006 Dodge Charger, and 2006 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Hood Adjuster Bumpers

Courtesy of DAIMLERCHRYSLER CORP.

Open and support the hood.
Unscrew the hood adjustment bumper(s) (1) from the mounting hole(s) in the top of the headlamp mounting crossmember (2).
Remove the adjustment bumper(s) from the vehicle.