Section 23 (Body - Interior & Exterior): Hood: Bumper-Adjustment: Installation

WARNING: This page is about a different car, the 2006 Dodge Magnum, 2006 Dodge Charger, and 2006 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Hood Adjuster Bumpers

Courtesy of DAIMLERCHRYSLER CORP.

Install the hood adjustment bumper(s) (1) into the mounting hole(s) located in the top of the headlamp mounting crossmember (2).
Adjust the adjustment bumper(s) in or out of the crossmember as necessary to achieve proper hood alignment.