LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> External Pages >> Different car >> Section 23 (Body - Interior & Exterior) >> DECKLID/Hatch/Liftgate/Tailgate >> Latch >> Removal

Section 23 (Body - Interior & Exterior): DECKLID/Hatch/Liftgate/Tailgate: Latch: Removal

WARNING: This page is about a different car, the 2006 Dodge Magnum, 2006 Dodge Charger, and 2006 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Deck Lid
GC0013354Courtesy of DAIMLERCHRYSLER CORP.
  1. Open the deck lid.
  2. Disconnect and isolate the battery negative cable.
  3. Remove the cover from over the latch on the inside of the deck lid. (Refer to BODY/DECKLID/COVER - DECKLID LATCH - REMOVAL) .
  4. Disconnect the connector (2) of the body wire harness take out for the deck lid (1) from the latch connector receptacle (3).
    Fig 2: Latch
    GC0013357Courtesy of DAIMLERCHRYSLER CORP.
  5. Remove the two screws (2) that secure the latch (3) to the inside of the deck lid (1).
  6. Remove the latch from the inside of the deck lid.