LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> External Pages >> Different car >> Section 23 (Body - Interior & Exterior) >> DECKLID/Hatch/Liftgate/Tailgate >> Latch Striker >> Removal

Latch Striker: Removal

WARNING: This page is about a different car, the 2006 Dodge Magnum, 2006 Dodge Charger, and 2006 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Latch Striker
GC0013358Courtesy of DAIMLERCHRYSLER CORP.
  1. Open the deck lid.
  2. Remove the trunk rear trim panel from the inside of the deck opening lower panel (3). (Refer to BODY/INTERIOR/TRUNK REAR TRIM PANEL - REMOVAL) .
  3. Mark the deck lid latch striker (2) location on the inside of the deck opening lower panel to aid reinstallation.
  4. Remove the two screws (1) that secure the latch striker to the inside of the deck opening lower panel.
  5. Remove the latch striker from the vehicle.
scientia non olet · About LEMON Manuals