Section 23 (Body - Interior & Exterior): DECKLID/Hatch/Liftgate/Tailgate: Cover: Installation
WARNING: This page is about a different car, the 2006 Dodge Magnum, 2006 Dodge Charger, and 2006 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
- Position the latch cover (1) over the latch on the deck lid inner panel (3).
- Engage the emergency latch release T-handle through the slit in the cover.
- Align the mounting holes in the cover to the holes in the deck lid inner panel.
- Install the four push-pin fasteners that secure the cover to the deck lid.
- Close the deck lid.