THERMO Bypass Valve-Removal

WARNING: This page is about a different car, the 2008 Dodge Magnum, 2008 Dodge Charger, and 2008 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Thermal Bypass Valve

Courtesy of CHRYSLER LLC

1 - MOUNTING BOLT

2 - THERMAL BYPASS VALVE BLOCK

3 - COOLER LINE FITTING

Raise and support vehicle.
Remove front transmission cooler lines from the thermal bypass valve block (2).
Remove rear transmission cooler lines from the thermal bypass valve block (2).
Remove thermal bypass valve block (2).