LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> External Pages >> Different car >> Section 227 (Engine & Automatic Transmission Cooling System) >> Transmission >> Lines-Transmission Cooler >> Removal >> Transmission Cooler Lines-Removal

Transmission Cooler Lines-Removal

WARNING: This page is about a different car, the 2008 Dodge Magnum, 2008 Dodge Charger, and 2008 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove upper radiator closure panels
  2. Using Release Tool 8875A, remove transmission cooler lines from transmission cooler. See STANDARD PROCEDURE .
  3. Raise vehicle on hoist.
  4. Remove front transmission cooler lines from the thermal bypass valve block.
  5. Remove rear transmission cooler lines from the thermal bypass valve block
  6. Remove the transmission cooler lines from the transmission.
scientia non olet · About LEMON Manuals