Standard Procedure: Cooling-Draining
WARNING: This page is about a different car, the 2008 Dodge Magnum, 2008 Dodge Charger, and 2008 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
WARNING:
Do not remove cylinder block drain plugs or loosen radiator draincock with system hot and under pressure. Serious burns from coolant can occur.
NOTE:
Typical drain plug shown in illustration.
DO NOT WASTE reusable coolant. If solution is clean, drain coolant into a clean container for reuse.
- Remove radiator pressure cap.
- Loosen radiator petcock.
- Remove drain plug (1).