Section 227 (Engine & Automatic Transmission Cooling System): Specifications: Cooling-Torque
WARNING: This page is about a different car, the 2008 Dodge Magnum, 2008 Dodge Charger, and 2008 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
| DESCRIPTION | N.m | Ft. Lbs. | In. Lbs. |
|---|---|---|---|
| Automatic Belt Tensioner to Block - Bolts | 54 | 40 | - |
| 3.0L Diesel | - | - | - |
| Block Heater - Bolt | 2 | - | 17 |
| Generator/Compressor Mounting Bracket - Bolts - | - | - | - |
| No. 1 and No. 2 | 54 | 40 | - |
| No. 3 | 40 | 30 | - |
| Fan Shroud Mounting - Bolts | 6 | - | 50 |
| Dual Fan Blade to Fan Motor | 6 | - | 50 |
| Idler Pulley - Bolt - 5.7L/6.1L | 54 | 40 | - |
| Idler Pulley - Bolt - 2.7L/3.5L | 28 | - | 250 |
| Radiator to Support Bracket - Bolts | 12 | - | 106 |
| Thermostat Housing - Bolts - 2.7L/3.5L | 11.8 | - | 105 |
| Housing - Coolant Outlet - 2.7L | 11.8 | - | 105 |
| Housing - Coolant - 3.0L Diesel | 11.8 | - | 105 |
| Heater Supply Tube | 3.4 | - | 30 |
| Thermostat Housing - Bolts - 5.7L/6.1L | 13 | - | 112 |
| Upper Radiator Closure Panel - Bolts | 10 | - | 90 |
| Water Pump - Bolts - 2.7L/3.5L | 11.8 | - | 105 |
| Water Pump - Bolts - 5.7L/6.1L | 28 | 20 | - |
| Transmission Cooler Lines at Transmission | 20 | 18 | - |
| Transmission Cooler lines at thermal bypass valve | 20 | 28 | - |