LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> External Pages >> Different car >> Section 227 (Engine & Automatic Transmission Cooling System) >> Engine >> Thermostat-Engine Coolant >> Installation >> Installation-3.5L

Thermostat-Engine Coolant: Installation: Installation-3.5L

WARNING: This page is about a different car, the 2008 Dodge Magnum, 2008 Dodge Charger, and 2008 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position gasket on thermostat and housing.
  2. Install thermostat housing, gasket and mounting bolts onto block. Tighten attaching bolts to 12 N.m (105 in. lbs.).
  3. Install radiator hose.
  4. Install bypass hose.
  5. Fill cooling system. See STANDARD PROCEDURE .
scientia non olet · About LEMON Manuals