Sensor-Engine Coolant Temperature: Removal: Removal-3.5L
WARNING: This page is about a different car, the 2008 Dodge Magnum, 2008 Dodge Charger, and 2008 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
| 1 - CAMSHAFT POSITION SENSOR |
| 2 - ENGINE COOLANT TEMPERATURE SENSOR |
- Disconnect negative battery cable.
- Partially drain cooling system. See STANDARD PROCEDURE .
- With the engine cold, disconnect coolant sensor electrical connector.
- Remove sensor (2).