Sensor-Engine Coolant Temperature: Installation: Installation-5.7L/6.1L
WARNING: This page is about a different car, the 2008 Dodge Magnum, 2008 Dodge Charger, and 2008 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
- Apply thread sealant to sensor threads.
- Install ECT sensor (3) to engine.
- Tighten sensor to 11 N.m (97.3 in. lbs.) torque.
- Connect electrical connector (2) to ECT sensor (3).
- Fill the cooling system. See STANDARD PROCEDURE .