Sensor-Engine Coolant Temperature: Installation: Installation-2.7L
WARNING: This page is about a different car, the 2008 Dodge Magnum, 2008 Dodge Charger, and 2008 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
| 1 - ENGINE COOLANT SENSOR |
| 2 - ELECTRICAL CONNECTOR |
| 3 - COOLANT OUTLET TUBE |
- Apply thread sealant to sensor threads.
- Install engine coolant temperature sensor (1) into coolant outlet tube (3).
- Tighten sensor to 28 N.m (20 ft. lbs.) torque.
- Connect electrical connector (2) to engine coolant temperature sensor (1).