Removal-2.7L/3.5L Engine
WARNING: This page is about a different car, the 2008 Dodge Magnum, 2008 Dodge Charger, and 2008 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
Courtesy of CHRYSLER LLC
| 1 - BLOCK HEATER |
| 2 - ENGINE - RIGHT SIDE |
- Raise vehicle on hoist.
- Detach power cord plug from block heater (1).
- Remove block heater attaching screw located below heater terminals.
- Remove block heater from cylinder block (2).