Heater-Engine Block: Installation: Installation-5.7L/6.1L
WARNING: This page is about a different car, the 2008 Dodge Magnum, 2008 Dodge Charger, and 2008 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
| 1 - BLOCK HEATER |
- Thoroughly clean cylinder block core hole and block heater seat.
- Insert block heater assembly into the block. See Fig 1.
- With block heater fully seated, tighten bolt to 2 N.m (17 in. lbs.) torque.