Removal-3.0L Diesel
WARNING: This page is about a different car, the 2008 Dodge Magnum, 2008 Dodge Charger, and 2008 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
| 1 - GENERATOR |
| 2 - POWER STEERING PUMP |
| 3 - ACCESSORY DRIVE BELT |
| 4 - CRANKSHAFT PULLEY |
| 5 - ACCESSORY DRIVE BELT TENSIONER |
| 6 - WATER PUMP PULLEY |
| 7 - A/C COMPRESSOR PULLEY |
| 8 - IDLER PULLEY |
- Disconnect negative battery cable.
- Remove accessory drive belt. See Figure.
- Remove belt tensioner retaining bolt and remove tensioner (5) from bracket.