Stationary Glass: Glass-Quarter: Removal: Glass-Liftgate
WARNING: This page is about a different car, the 2008 Dodge Magnum, 2008 Dodge Charger, and 2008 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
- Before proceeding with the following repair procedure, review all warnings and cautions. See WARNING .
- Remove the quarter panel trim from the side of the vehicle being serviced.
- Carefully pull down the headliner to access the upper mounting studs (1) that secure the quarter glass (2) to the window fence (3) and, remove the nuts from the studs.
- Remove the nuts that secure the lower mounting studs (4) to the window fence and, remove the nuts from the studs.
- Using razor knife, cut butyl sealer between the mounting studs that secure the quarter glass to window fence.
- Carefully push the quarter window glass from the opening.