Liftgate Upper Trim Panel
WARNING: This page is about a different car, the 2008 Dodge Magnum, 2008 Dodge Charger, and 2008 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
- Open the liftgate (6).
- Remove the lower trim panel from the inside of the liftgate. See REMOVAL .
- Remove the two screws (4) that secure the lower corners of the upper trim panel (3) to the inside of the liftgate.
- Using a trim stick or another suitable wide flat-bladed tool, carefully pry the trim panel away from the inside of the liftgate to release the push-in plastic fasteners that secure the panel to the liftgate.
- Remove the liftgate upper trim panel from the vehicle.