Cowl Trim: Removal: Removal-Upper
WARNING: This page is about a different car, the 2008 Dodge Magnum, 2008 Dodge Charger, and 2008 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
- Insert trim stick from the outside in the direction of arrow (2) under the middle of the part.
- Then slide trim stick up to the upper spring clip retainer, and pry to disengage clip.
- Slide the trim stick down to the lower spring clip retainer, and pry to disengage clip.
- Remove the upper cowl trim from the vehicle.