B-Pillar Trim: Removal: Removal-Lower
WARNING: This page is about a different car, the 2008 Dodge Magnum, 2008 Dodge Charger, and 2008 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
- Loosen the front door sill portion of the lower cowl trim at the rear of the front door opening for access to the forward lower B-pillar trim screw. See REMOVAL .
- Loosen the front of the scuff plate trim from the rear door sill for access to the rearward lower B-pillar trim screw. See REMOVAL .
- Move aside the seat belt webbing to access and remove the two screws (2) that secure the upper end of the lower B-pillar trim (3) to the inside of the B-pillar (1).
- Remove the two screws (4) that secure the lower end of the B-pillar trim to the front and rear door sills.
- Disengage the seat belt webbing from the slot in the upper end of the lower B-pillar trim through the slit in the trim and remove the trim from the inside of the B-pillar.