LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> External Pages >> Different car >> Section 226 (Body - Interior & Exterior) >> Exterior >> Belly Pan >> Removal >> Belly Pan

Belly Pan

WARNING: This page is about a different car, the 2008 Dodge Magnum, 2008 Dodge Charger, and 2008 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Locating Front Belly Pan And Screws
GC0012960Courtesy of CHRYSLER LLC
  1. Raise and support the vehicle.
  2. Remove the screws (1) that secure the front belly pan (2) to the underside of the vehicle.
  3. Remove the front belly pan from the underside of the vehicle.
    Fig 2: Rear Belly Pan
    GC0013420Courtesy of CHRYSLER LLC
  4. Remove the screws (1) that secure the rear belly pan (2) to the underside of the vehicle.
  5. Remove the rear belly pan from the underside of the vehicle.
scientia non olet · About LEMON Manuals