Glass Run Channel: Removal: Channel-Glass
WARNING: This page is about a different car, the 2008 Dodge Magnum, 2008 Dodge Charger, and 2008 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the trim panel from the inside of the rear door. See REMOVAL .
- Remove the watershield from the inside of the rear door. See REMOVAL .
- Loosen the two screws (1) that secure the rear door glass channel and bracket (2) to the inside of the rear door.
- Disengage the two screws from the keyed holes near the back of the inner door panel and remove the channel and bracket from the interior of the rear door.