Section 226 (Body - Interior & Exterior): DECKLID: Hinge: Removal: Hinge-DECKLID
WARNING: This page is about a different car, the 2008 Dodge Magnum, 2008 Dodge Charger, and 2008 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
- Open and support the deck lid (1) with a suitable prop or block.
- Remove the support cylinder from the deck lid hinge. See REMOVAL .
- Mark the upper hinge bracket (3) location on the deck lid inner panel to aid reinstallation.
- Remove the two screws (2) that secure the hinge to the deck lid.
- Mark the lower hinge bracket (1) location on the deck lid opening drain trough to aid reinstallation.
- Remove the three screws (2) that secure the hinge to the drain trough.
- Remove the deck lid hinge from the vehicle.