Tire Leak Repairing
WARNING: This page is about a different car, the 2008 Dodge Magnum, 2008 Dodge Charger, and 2008 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
For proper repairing, a radial tire must be removed from the wheel. Repairs should only be made if the defect, or puncture, is in the tread area (1). The tire should be replaced if the puncture is located in the sidewall.
Deflate tire completely before attempting to dismount the tire from the wheel. Use a lubricant such as a mild soap solution when dismounting or mounting tire. Use tools free of burrs or sharp edges which could damage the tire or wheel rim.
Before mounting tire on wheel, make sure all rust is removed from the rim bead and repaint if necessary.
Install wheel on vehicle, and progressively tighten the 5 wheel nuts to a torque of 150 N.m (110 ft. lbs.) (Police - 190 N.m (140 ft. lbs.)).