LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> External Pages >> Different car >> Section 223 (Front Suspension & Rear Suspension) >> Rear >> Toe Link >> Removal >> Link - Right Toe

Link - Right Toe

WARNING: This page is about a different car, the 2008 Dodge Magnum, 2008 Dodge Charger, and 2008 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
  1. Raise and support vehicle. Refer to STANDARD PROCEDURE .
    Fig 1: Tire And Wheel Mounting
    GC0012971Courtesy of CHRYSLER LLC
  2. Remove wheel mounting nuts (3), then rear tire and wheel assembly (1).
    Fig 2: WSS Routing Along Left Toe Link
    GC0013012Courtesy of CHRYSLER LLC
  3. If equipped, remove wheel speed sensor cable (2) from toe link.
    Fig 3: Rear Toe Adjustment Bolt Nut
    GC0013015Courtesy of CHRYSLER LLC
  4. While holding toe adjustment cam bolt from rotating, remove nut (3) securing toe link at crossmember (1).
    Fig 4: Toe Link Mounting
    GC0013016Courtesy of CHRYSLER LLC
  5. Slide cam bolt (2) rearward out of crossmember and link (1).
  6. Remove mounting bolt (3) and nut at knuckle.
  7. Remove toe link (1).
scientia non olet · About LEMON Manuals