LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> External Pages >> Different car >> Section 223 (Front Suspension & Rear Suspension) >> Rear >> Link-Compression >> Removal >> Link - Compression

Link - Compression

WARNING: This page is about a different car, the 2008 Dodge Magnum, 2008 Dodge Charger, and 2008 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
  1. Raise and support vehicle. Refer to STANDARD PROCEDURE .
    Fig 1: Tire And Wheel Mounting
    GC0012971Courtesy of CHRYSLER LLC
  2. Remove wheel mounting nuts (3), then rear tire and wheel assembly (1).
    Fig 2: Compression Link Mounting
    GC0012997Courtesy of CHRYSLER LLC
  3. Remove bolt and nut (2) mounting link (3) at knuckle.
  4. Remove bolt and nut (1) mounting link (3) at crossmember.
  5. Remove link (3).