Rear Suspension
WARNING: This page is about a different car, the 2008 Dodge Magnum, 2008 Dodge Charger, and 2008 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
This vehicle utilizes a five-link rear suspension including the following major components:
- Camber Link (1)
- Compression Link (5)
- Spring Link (2)
- Tension Link (6)
- Toe Link (3)
- Coil Spring
- Crossmember
- Hub And Bearing
- Knuckle (4)
- Shock Absorber
- Stabilizer Bar
The knuckle, camber link, compression link and tension link are aluminum castings. Extra care needs to be taken when servicing these components. Later production compression links may be constructed of welded tubular steel.
Service Procedures for the crossmember can be found in the Frame And Bumpers article. Refer to REMOVAL .