Battery Tray

WARNING: This page is about a different car, the 2008 Dodge Magnum, 2008 Dodge Charger, and 2008 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Removing/Installing Battery Tray

Courtesy of CHRYSLER LLC

Position the battery tray in the vehicle and install the mounting fasteners.

Fig 2: Removing/Installing Power Distribution Center
Courtesy of CHRYSLER LLC
Position the Power Distribution Center (PDC) onto the battery tray mounting tabs. Gently apply downward pressure on the PDC until it snaps into place.
Install the battery. See INSTALLATION .