Oil Pump
WARNING: This page is about a different car, the 2008 Dodge Magnum, 2008 Dodge Charger, and 2008 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
Courtesy of CHRYSLER LLC
| 1 - INNER OIL SEAL |
| 2 - OUTER OIL SEAL |
- Install new inner oil pump seal (1) with Seal Installer 8902-A. See Fig 1.
- Replace O-ring (2). See Fig 1.
Courtesy of CHRYSLER LLC
| 1 - OUTER PUMP ROTOR |
| 2 - INNER PUMP ROTOR |
- Lubricate pump gears and place in the pump housing. Insert pump gear (1) so that the chamfer (arrow) points towards the pump housing. See Fig 2.