BTSI Override

WARNING: This page is about a different car, the 2008 Dodge Magnum, 2008 Dodge Charger, and 2008 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: Some shifter assemblies may have a small external trim cover to actuate the Brake Transmission Shifter/Ignition Interlock (BTSI).

Fig 1: BTSI Override

Courtesy of CHRYSLER LLC

1 - SHIFTER ASSEMBLY

2 - BTSI OVERRIDE

In the event of an electrical failure, the vehicle can be shifted out of PARK by using the following procedure.

Fig 2: Cubby Bin Liner

Courtesy of CHRYSLER LLC

Turn the key to the ACC or ON position.
Remove the liner to the cubby bin to the right side of the shifter.

Fig 3: NAG1 BTSI
Courtesy of CHRYSLER LLC
Depress the BTSI override (2) on the side of the shifter assembly (1).
While the override is depressed, move the shifter out of the PARK position.
Return the cubby bin liner to its original location.