LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> External Pages >> Different car >> Section 220 (Steering System) >> Pump >> Diagnosis And Testing >> Power Steering Pump And Hoses >> Checking For Power Steering Hoses Touching Body Or Frame Of Vehicle

Checking For Power Steering Hoses Touching Body Or Frame Of Vehicle

WARNING: This page is about a different car, the 2008 Dodge Magnum, 2008 Dodge Charger, and 2008 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.

Check hoses and hose tubes as following:

  1. Inspect hoses and hose tubes for witness marks. If witness marks are present, adjust hose(s) to the proper position by loosening, repositioning and tightening attachments to the specified torque. See SPECIFICATIONS . Do not bend tubing to adjust.  Replace the hose assembly if damaged.
  2. Check fastener torque of hose mounting brackets and tube nuts. See SPECIFICATIONS .
  3. Have a helper bump the steering gear off of the stops to induce pressure fluctuations which may move the hose. If hose contact is made, adjust hose(s) to the proper position by loosening, repositioning and tightening attachments to the specified torque. See SPECIFICATIONS . Do not bend tubing to adjust.  Replace the hose assembly if damaged.
scientia non olet · About LEMON Manuals