LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> External Pages >> Different car >> Section 22 (Ignition System (Service Information)) >> Sensor-Knock >> Removal >> 3.5L

Section 22 (Ignition System (Service Information)): Sensor-Knock: Removal: 3.5L

WARNING: This page is about a different car, the 2006 Dodge Magnum, 2006 Dodge Charger, and 2006 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Locating Electrical Connector
GC0015993Courtesy of DAIMLERCHRYSLER CORP.
  1. Disconnect the negative battery cable.
  2. Remove the upper intake manifold, (Refer to ENGINE/MANIFOLDS/INTAKE MANIFOLD - REMOVAL)
  3. Disconnect the electrical connector.
    Fig 2: Locating Knock Sensor
    GC0015995Courtesy of DAIMLERCHRYSLER CORP.
  4. Remove the knock sensor.
scientia non olet · About LEMON Manuals