LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> External Pages >> Different car >> Section 22 (Ignition System (Service Information)) >> Sensor-Camshaft Position >> Removal >> 3.5L

Sensor-Camshaft Position: Removal: 3.5L

WARNING: This page is about a different car, the 2006 Dodge Magnum, 2006 Dodge Charger, and 2006 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Locating Cam Sensor
GC0015974Courtesy of DAIMLERCHRYSLER CORP.
  1. Camshaft Position Sensor location.
  2. Disconnect negative battery cable.
    Fig 2: Removing/Installing Electrical Connector
    GC0015977Courtesy of DAIMLERCHRYSLER CORP.
  3. Unlock electrical connector.
  4. Remove electrical connector.
    Fig 3: Removing/Installing Sensor
    GC0015975Courtesy of DAIMLERCHRYSLER CORP.
  5. Remove mounting bolt.
  6. Remove sensor.
scientia non olet · About LEMON Manuals