LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> External Pages >> Different car >> Section 22 (Ignition System (Service Information)) >> Sensor-Camshaft Position >> Removal >> 2.7L

Sensor-Camshaft Position: Removal: 2.7L

WARNING: This page is about a different car, the 2006 Dodge Magnum, 2006 Dodge Charger, and 2006 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Disconnecting/Connecting Electrical Connector
GC0015972Courtesy of DAIMLERCHRYSLER CORP.
  1. Disconnect negative battery cable.
  2. Unlock and disconnect electrical connector.
    Fig 2: Removing/Installing Cam Sensor
    GC0015973Courtesy of DAIMLERCHRYSLER CORP.
  3. Remove mounting bolt.
  4. Remove sensor.
scientia non olet · About LEMON Manuals