LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> External Pages >> Different car >> Section 22 (Ignition System (Service Information)) >> Sensor-Camshaft Position >> Installation >> 3.5L

Sensor-Camshaft Position: Installation: 3.5L

WARNING: This page is about a different car, the 2006 Dodge Magnum, 2006 Dodge Charger, and 2006 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Removing/Installing Sensor
GC0015975Courtesy of DAIMLERCHRYSLER CORP.
  1. Install new spacer to sensor if installing the old sensor or new sensor will have the spacer installed.
    Fig 2: Locating Cam Sensor
    GC0015974Courtesy of DAIMLERCHRYSLER CORP.
  2. Install sensor and insert until sensor makes contact with tone wheel.
  3. Install mounting bolt.
  4. Tighten mounting bolt to 12 N.m (105 in. lbs.).
    Fig 3: Connector Locked
    GC0015976Courtesy of DAIMLERCHRYSLER CORP.
  5. Install electrical connector.
  6. Lock connector.
  7. Connect negative battery cable.
scientia non olet · About LEMON Manuals