LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> External Pages >> Different car >> Section 22 (Ignition System (Service Information)) >> Sensor-Camshaft Position >> Installation >> 2.7L

Sensor-Camshaft Position: Installation: 2.7L

WARNING: This page is about a different car, the 2006 Dodge Magnum, 2006 Dodge Charger, and 2006 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Removing/Installing Cam Sensor
GC0015973Courtesy of DAIMLERCHRYSLER CORP.
  1. Install sensor.
  2. Install mounting bolt.
  3. Tighten bolt to 12 N.m (105 in. lbs.).
    Fig 2: Disconnecting/Connecting Electrical Connector
    GC0015972Courtesy of DAIMLERCHRYSLER CORP.
  4. Connect electrical connector and lock.
  5. Connect negative battery cable.
scientia non olet · About LEMON Manuals