LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> External Pages >> Different car >> Section 22 (Ignition System (Service Information)) >> Coil-Ignition >> Installation >> 2.7L

Section 22 (Ignition System (Service Information)): Coil-Ignition: Installation: 2.7L

WARNING: This page is about a different car, the 2006 Dodge Magnum, 2006 Dodge Charger, and 2006 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Removing/Installing Ignition Coil
GC0002368Courtesy of DAIMLERCHRYSLER CORP.
  1. Install ignition coil assembly to spark plug.
  2. Install coil screws and tighten: 2.7L engine to 6.2 N.m (55 in. lbs.).
  3. Connect the electrical connector and lock.
    Fig 2: Ignition Coils
    GC0002366Courtesy of DAIMLERCHRYSLER CORP.
  4. Install the intake manifold, (Refer to ENGINE/MANIFOLDS/INTAKE MANIFOLD - INSTALLATION)
  5. Connect negative battery cable.
scientia non olet · About LEMON Manuals