LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> External Pages >> Different car >> Section 22 (Ignition System (Service Information)) >> Capacitor-Ignition Coil >> Installation >> 6.1L

Capacitor-Ignition Coil: Installation: 6.1L

WARNING: This page is about a different car, the 2006 Dodge Magnum, 2006 Dodge Charger, and 2006 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Removing/Installing Capacitor
GC0039371Courtesy of DAIMLERCHRYSLER CORP.
  1. Install sensor (1) to mounting stud.
  2. Install and tighten nut (4).
  3. Install electrical connector (2).
scientia non olet · About LEMON Manuals