Barrels-Air Outlets

WARNING: This page is about a different car, the 2008 Dodge Magnum, 2008 Dodge Charger, and 2008 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: The instrument panel air outlet barrels are retained to the pivots within the air outlets by a snap fit.

Fig 1: Removing Air Outlet Barrel

Courtesy of CHRYSLER LLC

NOTE: LHD model shown in illustration. RHD model similar.

Using a trim stick or another suitable wide flat-bladed tool (1), gently pry the air outlet barrel(s) (2) out of the instrument panel air outlet(s) (3) as required.