Input Speed Sensor

WARNING: This page is about a different car, the 2007 Chrysler PT Cruiser. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Input Speed Sensor Location

Courtesy of CHRYSLER LLC

1 - INPUT SPEED SENSOR

The Input Speed Sensor (1), is a two-wire magnetic pickup device that generates AC signals as rotation occurs. It is threaded into the transaxle case. See Fig 1.

Fig 2: Identifying O-Ring Location

Courtesy of CHRYSLER LLC

1 - INPUT SPEED SENSOR

2 - O-RING

The Input Speed Sensor (1) is sealed with an O-ring (2), and is considered a primary input to the Powertrain/Transmission Control Module. See Fig 2.