Interlock Mechanism

WARNING: This page is about a different car, the 2007 Chrysler PT Cruiser. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Removing/Installing Interlock Mechanism

Courtesy of CHRYSLER LLC

1 - MOUNTING SCREW

2 - INTERLOCK MECHANISM

Position the interlock housing at steering column. Install the two interlock mechanism-to-steering column attaching screws (1). See Fig 1. Torque screws to 3 N.m (21 in. lbs.).
Snap the interlock cable into the housing.

Fig 2: Removing/Installing Steering Column Shrouds
Courtesy of CHRYSLER LLC

1 - UPPER SHROUD

2 - LOWER SHROUD
Install steering column upper and lower shrouds (1,2). See Fig 2.

Fig 3: Removing/Installing Steering Column Lower Cover
Courtesy of CHRYSLER LLC

1 - LOWER COVER
Install steering column lower cover (1). See Fig 3.