LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> External Pages >> Different car >> Section 208 (2.4L Engine (Service Information)) >> Valve Timing >> Belt And Sprockets-Timing >> Installation >> Crankshaft Sprocket

Crankshaft Sprocket

WARNING: This page is about a different car, the 2007 Chrysler PT Cruiser. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Installing Crankshaft Sprocket
GC0021221Courtesy of CHRYSLER LLC
1 - CRANKSHAFT DAMPER/SPROCKET INSTALLER 6792
2 - TIGHTEN NUT TO INSTALL
CAUTION: The crankshaft sprocket is set to a predetermined depth from the factory for correct timing belt tracking. If removed, use of Crankshaft Damper/Sprocket Installer 6792 is required to set the sprocket to original installation depth. An incorrectly installed sprocket will result in timing belt and engine damage.
  1. Install crankshaft sprocket using Crankshaft Damper/Sprocket Installer 6792 (1). See Fig 1.
  2. Install timing belt. Refer to INSTALLATION .
  3. Install upper and lower front timing belt covers. Refer to INSTALLATION .
scientia non olet · About LEMON Manuals