Oil Pump
WARNING: This page is about a different car, the 2007 Chrysler PT Cruiser. However, it is still accessible from the selected car via links, so may be relevant.
Courtesy of CHRYSLER LLC
| 1 - O-RING |
| 2 - FRONT CRANKSHAFT SEAL |
| 3 - INNER ROTOR |
| 4 - OIL PUMP COVER |
| 5 - FASTENER |
| 6 - OUTER ROTOR |
| 7 - OIL PUMP BODY |
- Remove oil pump cover fasteners (5), and lift off cover (4). See Fig 1.
- Remove pump rotors (3,6). See Fig 1.
- Wash all parts in a suitable solvent and inspect carefully for damage or wear.