LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> External Pages >> Different car >> Section 208 (2.4L Engine (Service Information)) >> Engine Mounts >> Mount-Right >> Removal >> Engine Mount - Right

Engine Mount - Right

WARNING: This page is about a different car, the 2007 Chrysler PT Cruiser. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: View Of Engine Mount - Right
GC0021109Courtesy of CHRYSLER LLC
1 - SNUBBER PAD
2 - RIGHT ENGINE MOUNT
3 - BOLTS
  1. Remove the engine assembly for the required clearance to access the engine mount. Refer to REMOVAL .
    NOTE: The right engine mount attaching holes are slightly oversize to compensate for manufacturing tolerances. The mount has been set at the manufacturing plant for proper powertrain alignment. Therefore, it is necessary to mark the position of the mount before the attaching bolts (3) are loosened.
  2. Using a permanent ink marker or equivalent, mark the position of engine mount (2) to the body frame rail.
  3. Remove bolts (3) attaching mount to body. See Fig 1.
  4. Remove mount (2).
scientia non olet · About LEMON Manuals