LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> External Pages >> Different car >> Section 208 (2.4L Engine (Service Information)) >> Engine Mounts >> Mount-Left >> Removal >> Engine Mount - Left

Engine Mount - Left

WARNING: This page is about a different car, the 2007 Chrysler PT Cruiser. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: PDC Bracket Attaching Bolts
GC0021164Courtesy of CHRYSLER LLC
  1. Remove air cleaner assembly.
  2. Disconnect negative cable from battery.
  3. Remove bolts attaching the power distribution center (PDC) bracket (2) to left mount and battery tray (3). See Fig 1.
    Fig 2: View Of Left Mount
    GC0021239Courtesy of CHRYSLER LLC
    1 - BOLT
    2 - LEFT MOUNT
    3 - TRANSAXLE
    4 - BOLT
  4. Support transaxle (3) with a suitable jack.
  5. Remove mount to transaxle bolts (1). See Fig 2.
  6. Remove left mount (2) bracket to body frame rail fasteners. See Fig 2.
  7. Remove mount (2).