LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> External Pages >> Different car >> Section 208 (2.4L Engine (Service Information)) >> Engine Mounts >> Mount-Left >> Installation >> Engine Mount - Left

Engine Mount - Left

WARNING: This page is about a different car, the 2007 Chrysler PT Cruiser. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: View Of Left Mount
GC0042440Courtesy of CHRYSLER LLC
1 - BOLT
2 - LEFT MOUNT
3 - TRANSAXLE
4 - BOLT
  1. Install engine mount (2) bracket to body frame rail and tighten fasteners to 28 N.m (250 in. lbs.). See Fig 1.
  2. Position engine/transaxle for installation of mount to transaxle bolts (1). Install and tighten bolts to 68 N.m (50 ft. lbs.). See Fig 1.
  3. Remove jack from under transaxle (3).
    Fig 2: PDC Bracket Attaching Bolts
    GC0042441Courtesy of CHRYSLER LLC
    1 - PDC
    2 - PDC BRACKET BOLTS
    3 - BATTERY TRAY BOLT
  4. Install bolts (2) attaching the power distribution center (PDC) bracket to left mount and battery tray. See Fig 2.
  5. Connect negative cable to battery.
  6. Install air cleaner assembly.
scientia non olet · About LEMON Manuals